The Modal Microscope And A Sequenced Arpeggio Approach

Hello everyone!

.

I’ve been cleaning up a lot of the text for the GuitArchitecture book releases and wanted to post a lesson that uses some ideas and approaches from my Melodic Patterns book (available here).  But first, I need to talk about…

.

The Modal Microscope

.

When I explain using modes to students – I typically use the analogy of a microscope to discuss viewing modes conceptually on multiple levels.

.

Let’s say I want to solo over a D min7 chord.  So I’ll put that “under the microscope”.

.

On the 2x setting, I see that a number of minor modes will work over D min7.  In this case,  I’ll choose Dorian.

.

Going to the 4x setting on the microscope, I see that Dorian is made up of a series of interlocking 2-string patterns.

.

Note: 

If you’re unfamiliar with the 2-string approach I’m discussing I definitely recommend that you check out part 2, part 3a or part 3b of my guide to modes posts.

.

If I go to the 8x setting, I can break the 2-string patterns down into 1 string shapes and going to a higher resolution (16x) I can see those shapes as individual notes.  At the 16x setting – maybe I’m looking at the individual notes of D min7 (D, F, A and C) and thinking about accenting those notes in my playing.

.

If I now go out to the 1x setting – I see that D Dorian is just a subset of C major.  The thing is if you go playing a bunch of C major scales over D dorian and don’t resolve anything (or focus on the chord tones) – you’re missing a big piece of the puzzle.

.

It’s good to understand modes on multiple levels but if you see how all of the related modes interlock with each other, then (using the microscope analogy), you can deal with using modes with chords on the 1x or 2x level but use information from the higher levels in your playing.

.

Putting this to use:

.

I’ve posted a number of technical things here and decided to use a much lower gain approach than normal and slow things down a bit.  The same practice points as before (Tone, Tension and Timing) apply – but this exercise is all about how to find variations in small things.  (If you like the technical things don’t worry I’ve included some deceptively tricky variations as well!)

.

Let’s take a 2-string G Major shape.

.

.

.

The nice things about 2-string patterns like this is that the fingering repeats at each octave.  (So you only need to remember one fingering for a multi octave run).

.

.

.

One process I explore in my Melodic Patterns book is systematically breaking down patterns to get new sounds out of them.  In this case, I’m going to remove the 2nd and 4th note from the pattern which leaves me with this shape:

.

.

.

Looking closely at the notes reveals that I have a G, B, C and E which is a C maj7 arpeggio. By limiting it to a  2-string shape,  I can move it in octaves and the fingering stays the same.

.

Note:

The drums are the same pattern I’ve used on my other posts, so you can play against it for any other the things I post here (more info below).

.

.

.(I’ve added a C maj7 chord in front of this to give a sense of tonality.)

.

.

Going to a higher resolution

.

I know that G parent major also contains A Dorian – which works well over A minor chords.  So playing this shape over A minor the notes – now become: b7 (G), 9 (B), b3 (C) and 5th (E).  Which has a cool sound associated with it.  (I’ve subbed out A min7 for C maj 7 here for the opening chord).

.

.

.

Sequencing the ideas:

.

However cool any scale or arpeggio is, playing it in a linear up and down manner will only get you so far.  By playing groups of notes in short sequences, the arpeggio gains a little melodic drive.

.

In this first variation I’ll play groups of 3 (So I’m playing 3 ascending notes from each note of the arpeggio).  One way to immediately make this more interesting is to break the 3 note grouping out of the triplet rhythm.  Playing the same pattern in 16ths – displaces the first note of each pattern across different beats.

.

.

.

Here’s the same idea descending: (This is another case where the microscope idea comes into play.  The A note ending the phrase isn’t part of the 4 note arpeggio – but gives the descending line a sense of resolution.  Since I’m seeing and hearing the phrase as an A minor tonality – I’m resolving it to the tonic (A),  third (C) or 5th (E).

.

.

.

For a little variety –  I’ve taken the same idea but played it as sextuplets instead.  I’ve notated the first bar of it (as the notes are the same as the patterns above) – but I play it ascending and descending on the mp3 below.

.

.

.

5 alive

.

To get a little more mileage out of this arpeggio, I’m going to play the notes in groups of 5.  Here it is in a 1/16 note rhythm (I’ve left off the last 2 notes to keep it on one line).

.

.

.

Technical note:

Watch the position skip on the A/D and the B/ G strings!!

Here it is as septuplets (5 notes to the beat).

.

.

.

Changing the note order

.

You may have noticed that all of these arpeggios use a linear note order in the sequence.  So if G is the first note of the 1st pattern and B is the 2nd note – every pattern moves in straight ascending or descending order.

.

3 Note Pattern: G, B, C/B, C, E/C, E, G

in note order = 1,2, 3/2, 3, 4/ 3, 4, 1 etc.

.

But what if we varied up the note order?  In this example, I’m going to take play groups of 3 descending notes on each ascending note of the arpeggio. (So instead of playing note numbers 1,2 3  – I’m playing 3-2-1).

.

.

.

Here it is descending:

.

.

.

Displacing the rhythm by a 1/16 makes it cooler.

.

.

.

And again, descending:

.

.

Obligatory Plug

.

I’m only scratching the surface of what’s possible here.  The big takeway here is – if you really go deep on even something small – you can probably find interesting things that will work in your playing.

.

I would also be remiss in not mentioning that my melodic patterns book shows every possible unique combination of notes (and rests) in 1 – 6 note shapes and then shows how to combine them into longer sequences (up to 9 note patterns).  It is a deep resource that can open all manner of melodic and compositional doors (and makes a great gift as well!) ; )

.

Tones

.

I went with another tonal variation here and tried some of the lower gain settings on the Scuffham amp AU.  It’s a cool product and I should have a review up soon.  In the meantime – he’s a screenshot of the laptop set up I used to track this:

Click to see full size

.

I‘ve mentioned this in the laptop guitar posts – but the varispeed is a useful plug-in!  When I get bored with a metronome sound – I’ll throw a drum loop into the AU fileplayer and then use the varispeed to control the speed of the loop.

.

As always, I hope this helps!

.

-SC

.

If you like this post, you may also like:

.

Books:

LESSONS

.

Slash and Burn – Creating More Complex Sounds With Slash Chords

The GuitArchitect’s Guide to Modes Part 8 – Major Positional Modal Interchange and Complimenting Modes with Chords

THE GUITARCHITECT’S GUIDE TO MODES PART 7 – MINOR POSITIONAL MODAL INTERCHANGE AND COMPLIMENTING MODES WITH CHORDS

.

THE GUITARCHITECT’S GUIDE TO MODES PART 6 – THE CIRCLE OF 5THS AND MODAL INTERCHANGE

THE GUITARCHITECT’S GUIDE TO MODES PART 5 – MAKING THE MOST OF ONE PATTERN

The GuitArchitect’s Guide To Modes Part 4 – Modes and Chords

.

THE GUITARCHITECT’S GUIDE TO MODES PART 3B – SEEING THE SIX-STRING MAJOR SCALE

THE GUITARCHITECT’S GUIDE TO MODES PART 3A – SEEING THE SIX-STRING MAJOR SCALE

THE GUITARCHITECT’S GUIDE TO MODES PART 2 – SEEING THE TWO STRING MAJOR SCALE

.

The GuitArchitecture Guide To Modes Part 1 – Seeing The Single String Major Scale

Making Music Out Of Scales

.

Chords/Triads/Superimposition/Arpeggios:

GETTING HIPNESS FROM A MAJOR TRIAD OR MORE CHORD RECYCLING PART 3

Getting Hipness From A Major Triad Or More Chord Recycling Part 2

GETTING HIPNESS FROM A MAJOR TRIAD OR MORE CHORD RECYCLING PART 1

.

Getting Through The Gig – Negotiating A Chord Chart Part 3

Getting Through The Gig – Negotiating A Chord Chart Part 2

GETTING THROUGH THE GIG – NEGOTIATING A CHORD CHART PART 1

.

RECYCLING CHORDS PART II: TRIAD TRANSFORMATION

RECYCLING CHORDS PART I OR WHERE’S THE ROOT?

.

FAVORED CURRY OR SPICING UP CHORD SCALES AND TRIADS PART 2

FAVORED CURRY OR SPICING UP CHORD SCALES AND TRIADS PART 1

.

RECYCLING SHAPES OR MODULAR ARPEGGIOS FOR FUN AND PROFIT

GLASS NOODLES – ADAPTING A PHILIP GLASS ARPEGGIO APPROACH TO GUITAR

.

Practicing:

MELVILLE, MADNESS AND PRACTICING – OR FINDING THE DEEPER LESSON PART 2

Some Useful Online Practice Tools

POSSESSION IS 9/10S OF THE LAW BUT PERCEPTION IS EVERYTHING OR PRACTICING PART VII

TESTING YOUR VOCABULARY OR PRACTICING PART VI

PRACTICE WHAT YOU PLAY OR PRACTICING PART V

.

DEFINITIONS AND DOCUMENTS OR PRACTICING PART IV

TENSION AND THE SODA CAN OR PRACTICING PART III

PROPER POSTURE IS REQUIRED FOR PROPER PERFORMANCE – PRACTICING PART II

PRACTICE MAKES BETTER AKA PRACTICING PART I

.

Melville, Madness and Practicing – Or Finding The Deeper Lesson Part 2

Condensed Cliff Notes

.

Years ago, I found a back issue of National Lampoon that had a faux ad for Condensed Cliff Notes (“for people who didn’t have time to read the original”).  The joke was that major literary works were just boiled down into one sentence descriptions that couldn’t possibly encompass the scope of the book.  The Condensed Cliff Notes for Moby Dick was, “A whale bites off a man’s leg and he can’t forget about it.”

I don’t know how many of you have read Moby Dick.  I hated it when I had to read it in high school but really got to appreciate it when I was in college and read it again.  One of the central characters in the book was Captain Ahab, a man who not only couldn’t forget about the whale that bit his leg off – but was on monomaniacal mission of revenge that enveloped everyone around him in its wake.   At the end of the book, it’s also his undoing.

.

The Ahab effect and practicing

.

The nature of practicing music (seemingly endless repetition) makes it easy to fall into the Ahab role of obsessively trying to get a musical passage under your fingers.  I once had a lick I couldn’t get down.  It was challenging, but it certainly was something that was well with in my skill set.

.

But the more I worked at it  – the worse it got.

.

I’d work on this lick everyday for hours and get the metronome to a certain point.  When I came back to it, I’d have to knock the metronome back down 20 bpm – often 10 bpm lower than where I started the lick the day before!

You can imagine what this did for my sanity.

.

After a week of this – I started noticing a few things:

.

  • My goal line kept changing.  As I was working on the lick, I kept finding things wrong that I wanted to correct.  I was playing it clean, and then hear other technical issues when I switched to distortion. I was flubbing certain notes, and would go back to fix those.  I was rushing the parts where there were position changes.  I was over thinking it and the more energy I was putting into it the worse it got.  I was actually getting better at playing it, but because I kept adjusting the standard of what I was hearing I seemed further and further away from the goal.
  • I was in a rush.  I was putting all of this emphasis on this lick because I wanted to use it in a live context and  (finally)
  • I was hung up about the fact that I SHOULD be able to play it.

.

The operative terms here are, “hung up” and “should”.

.

Should is a faulty term. It implies value judgements that are hard, if not impossible to live up to and negates reality.   This might sound really  touchy-feely  to some people but this is the type of mindset that trips up musicians.  It’s why people get carpel tunnel (or Focal Dystonia)  – because they go all Ahab on something and assume that if they just work harder, that they’re going to get results quicker.

Everyone is different and this approach may work. for some people but it never worked for me.

.

Here’s what did work for me.

.

  • I got some distance and took a break.  I stopped playing for a couple fo days and came back to it fresh.
  • When did come back to it I had the lick down, but it taught me to try to approach all practicing more meditatively.  I noticed things that were wrong and worked on adjusting them rather than beating myself up about why I couldn’t do something.  When I did slip up and get angry or riled up – I made a note of that and tried smiling instead.

I found that I was really listening on a deeper level than I was before and using practicing to get to a deeper part of myself. I was really getting into the nuances of what I was playing and digging deeper into the pocket than I every had.  I noticed technical things that weren’t working and ultimately – I made a series of changes that had major technical ramifications for me in the long run.

.

All from one lick.

.

Anything has that potential to open the door to deeper expression.  But you won’t find it if all of your energy and attention is fixated on something.

.

In the next post, I’ll have some lesson material that uses approaches from my Melodic Patterns book, and we’ll get a glimpse into just how tricky playing 4 notes can be.

.

Thanks for reading!

-SC

.

If you like this post – you may also like:

POD HD Flash Memory Update, POD HD500 In Live Use And More Thoughts About Gear

I was going to wait a week and post this – but I want to break the lesson/gear/motivational posts up a little more evenly, and the Line 6 firmware update that was released yesterday provided a good reason to talk about gear.

Line 6 V 1.4 firmware update

.

Line 6 announced a new firmware update for POD HD PRO and HD 500.  (No word on updates for the 300/400).  Here’s what you get in the update (all text is from the Line 6 website):

.

What’s New?

  • Variable Input Impedance – This feature affects tone and feel because the guitar’s pickups are being “loaded” as they would be by an effect pedal or a tube amplifier. There are eight selectable options which can change the analog circuitry affecting the impedance of the Guitar Input. The options include seven discrete resistor values: 22k, 32k, 70k, 90k, 230k, 1M, 3.5M. There is also an Auto setting. When set to Auto the input impedance can automatically change depending on which amp or effect model is first in the signal chain of the current preset. Impedance settings are saved as part of each preset’s input selection.
  • Preset or Global Input Selection – When set to Preset, recalling a preset automatically selects which of the device’s audio inputs are used as the “source” – sort of like a built-in, programmable patchbay. The saved input impedance value will also be recalled with each preset. When set to Global, the input selection and impedance value saved with each preset will be ignored as presets are recalled; allowing presets with a variety of saved input settings to be heard from a single source without having to manually reprogram each preset’s input settings one at a time.
  • Hard Gate – An advanced gate capable of extremely quick response. With controls for hold time, decay rate, and separate open/close thresholds, Hard Gate is ideal for any genre including Metal. It can even be abused to create erratic “sputter” and “splat” effects.
  • Enhanced MIDI Control – Offers control of POD HD500 and POD HD Pro from external standard MIDI controllers. A variety of functions including Footswitch 1-8, Tap Tempo, Tuner, Looper Controls, and Expression Pedals can all be accessed via MIDI. For more details please refer to the latest version of the Advanced User Guide.
  • New Presets – This firmware includes lots of new presets. Many of the pre-existing Set Lists have gotten new presets and reordered based on customer feedback. The “BASS/ACO/VOC” Set List includes presets which provide a starting point for bass, acoustic guitar, and vocal processing. The Set List titled “L6LINK <-> DT” provides a starting point for users connecting a POD HD Pro to a DT Series amplifier. Note in this Set List presets 7A-D may not produce audio without a Variax connected and/or monitoring the FX Send output – these particular presets were created to illustrate just one of the approaches to getting amplified electric and direct (FOH) acoustic instruments from a single guitar and preset.

Some bugs were fixed as well.  I haven’t tried out the new presets yet (I tend to just mod ones I like from the customtone page or build them from scratch).  But the input impedance variability is interesting.  I’ve never used the Digidesign 11R – but a lot of the input comments that I’ve read about that seem to parallel this option.  There’s a lot of tonal options that come out in variations on this setting – but I’ve set mine to Auto and it seems to work well.

.

So in short – no new amps or cabs – but some nice features.

.

One thing this has done is create a bigger divide between the 300/400 and 500/PRO.

.

Here’s my $.02:

.

  • If you’re the kind of person that has 3-4 tones you typically use, and don’t run a lot of additional fx (and are okay with the cab sims Line 6 uses) – save some money and go with the 300/400.
  • If you want more tonal flexibility or the ability to bypass cabs – go with the 500.

.

I’m happy I have the 500.  It’s a good unit that largely works well – but you can get some good tones out of the 300/400.  In fact, some of the better tones I have are 300 tones that I adapted to my unit.  This is the best unit that they’ve made and the fact that the tones now respond to my roll off is putting me closer and closer to going ampless live entirely.

Having said that, the unit does have three things that prevent it from being the box it could be.

.

#1:  The DSP issue

.

This is a minor quibble, because you can still get really good sounds out of the unit but it’s is the biggest issue because it’s the one that doesn’t have an easy fix.  If you run a lot of effects, or use amp/cab combinations that use a lot of CPU, you will get a message that the DSP limit is reached and you’ll need to use FX, amps or cabs that use less resources.   From an architectural standpoint, this should have been run with the most DSP intensive amps, cabs and FX on the unit and then had chips that could accommodate that.  It’s difficult to anticipate what will happen with anything, but there’s really no excuse for reaching a DSP limit as that should have been engineered out of the unit before it went into production.

.

#2: The looper

.

One thing that’s also a huge difference between the 500 and the 300/400 is the available loop time on the looper.  However, I haven’t listed this as a sell point because in its current incarnation the looper has a fatal flaw in that you can’t adjust the volume of the wet/dry signals of loops.

In other words, if I’m creative a live loop I won’t be able to fade it out while bringing in a new part I’m playing.  My options then are to either stop the loop abruptly (which is usually jarring) or bring the whole unit volume down, turn off the loop and bring it up again.

It’s a problem – and it essentially limits the onboard looper to being a riff device.  Which is a drag, because it could be a lot more (particularly with the reverse and 1/2 speed options).  You’ll never have the flexibility of something like Sooperlooper on it – but when they get this simple thing fixed, it will make a big difference in the functionality of the looper on the unit.

.

#3: Global EQ

.

Another small point, but an irritating one.  As I mentioned in my taming the EQ post, the Atomic amp I use tends to have an EQ bump in the 90-100HZ range.  It’s also the range that a lot of what Chris Lavender uses when he’s playing Stick – so carving out some sonic space is important. Having a global EQ would allow me to make one tweak to go between using an amp live and going direct to a PA.  Not the end of the world, but an inconvenience that can be fixed.

.

Know what gear to hold onto

.

Steve Morse once had a great observation about gear. He said that he knows that the good effects are, because they’re the ones that rarely sees in the used sections of guitar stores.

My Digitech Space Station is a pain in the ass.  The A/D/A isn’t that great, the power supply is iffy at best and the only parameter control is the volume pedal.  It’s also a great unit.  It’s reverse function is the most musical one I’ve heard and it has a couple other sounds on it I just can’t get from other FX combinations.  I’ve had a lot of offers for it, but it’s one of the few pedals that’s not going anywhere.

Likewise, I’ve had my Akai Headrush E1 for a while.  It was my main looper in Visible Inc. and I never got rid of it because frankly the resale value was so low that there was no point in selling it.

At the CalArts gig I had with Dumb and Drummer back in October, holding on to the headrush was really a lifesaver, because I was able to set up small loops on the POD HD, record them with the headrush and then build multiple textures between the two loopers and go back and forth between them.  It wasn’t the most elegant solution, but it worked well and allowed me to reference early material and loop more thematically (and accompany the film better ultimately).

To deal with the EQ issue, I broke down and spent $60 on an MXR 6 band eq.  Spending an extra $40 would have gotten me the 10 band EQ, but in reality the 6 band works fine.  I like the compactness and durability of it and it allowed me to really bring my guitar out more in the trio format.

Fixing the loop and EQ issues on the HD would allow me to just bring just the HD instead of and HD and a couple of extra pedals, but as I’ve mentioned before 3 pedals is a long way from the 88 key keyboard case that served as my previous pedalboard.   And (for now) I’m really glad I held onto that headrush!

.

As always, thanks for reading!

-SC

.

PS – if you like this post you may also like:

.

SOME THOUGHTS ON MODELING, GEAR ACQUISITION AND THE POD HD500

LINE 6 POD FARM 2.5 UPDATE AND POD FARM FREE ANNOUNCED

New SooperLooper Update 1.6.16

.

POD HD VS POD FARM: A COST COMPARISON

LINE 6 FBV EXPRESS MK II REVIEW

POD HD500 AND POD FARM CONJECTURES

RIG AROUND THE ROSIE OR MEDIATIONS AND MEDITATIONS ON GEAR

LINE 6 POD FARM 2.0 OVERVIEW

VARIAX AC700 REVIEW/WORKBENCH OVERVIEW

The Ballad Of Cigar-Boy Or Threading Unlikely Connections Together Through Unison Tapping

The Story of Cigar Boy

has  moved!  You can find the all new and improved version here! (http://www.guitar-muse.com/unlikely-connections-unison-tapping-7805)